Client is trying to dial local and 11 digit calls. Display show "Call Not Allowed". No restrictions on phone. Inbound is good.
Allworx server 6x12, 7.7.19.3
Search found 6 matches
- Mon Mar 25, 2024 8:22 am
- Forum: Installation and Configuration Help
- Topic: call not allowed
- Replies: 1
- Views: 1494
- Wed Feb 14, 2024 7:28 am
- Forum: Installation and Configuration Help
- Topic: Interact
- Replies: 3
- Views: 1646
Re: Interact
I do have the softphone. I have clicked everywhere to try to see the Schedule button. I have also googled but I'm unable to find anything. It's odd that you can see page groups and park orbits.
- Tue Feb 13, 2024 8:58 am
- Forum: Installation and Configuration Help
- Topic: Interact
- Replies: 3
- Views: 1646
Interact
If I put a schedule button on Interact, where does it show up? I want to be able to set the schedule remotely.
TIA
TIA
- Thu Jan 11, 2024 12:05 pm
- Forum: Installation and Configuration Help
- Topic: Fax on analog port over SIP
- Replies: 3
- Views: 11024
Re: Fax on analog port over SIP
Can I assume that an ATA would be a better solution? I got that one to work somehow, but I have another fax machine on the same system that seems to time out after 25-30 seconds and return a fast busy. I hear the handshake but it doesn't connect. This machine is older. Adjusted Error correction to o...
- Mon Dec 18, 2023 8:56 am
- Forum: Installation and Configuration Help
- Topic: Fax on analog port over SIP
- Replies: 3
- Views: 11024
Fax on analog port over SIP
I have plugged a fax machine into the analog port on a 536. I can call out on the port. I checked the box that the port was connected to a fax machine. If I call in it answers with a fax tone. I tried changing the baud rate on the machine to 2400, 9600, 14400, and 33600. I get poor line quality on t...
- Thu Dec 07, 2023 9:54 am
- Forum: Installation and Configuration Help
- Topic: Alworx server active/registered and warrantee statu
- Replies: 1
- Views: 23111
Alworx server active/registered and warrantee statu
I am trying to learn the difference between registered and activated. If I look at my equipment management page, 1 or 2 are listed as registered but not activated. I called TS yesterday and wasn't provided with a decent answer as to why. I am also trying to see where the warrantee status of all my s...