Paging to remote site phones and horn
Posted: Sat Jan 26, 2013 10:27 am
We have a single centralized AllWorx system. Branch sites (~10 IP sets each) will connect over WAN with no system at their location. I can setup the IP sets in paging groups, but that's it - no generic SIP devices.
I purchased an ALGO 8180 and registered as a generic SIP handset with an extension. This is for the shop area at the branches.
Now we can either page all the phones at a location, or the shop by dialing the ALGO ext, but not both at the same time.
Works, but not ideal.
Would like a way to include other SIP devices in the paging group somehow.
Realize this would be very dependent on the generic SIP device - don't expect it to work with softphones or anything like that.
I purchased an ALGO 8180 and registered as a generic SIP handset with an extension. This is for the shop area at the branches.
Now we can either page all the phones at a location, or the shop by dialing the ALGO ext, but not both at the same time.
Works, but not ideal.
Would like a way to include other SIP devices in the paging group somehow.
Realize this would be very dependent on the generic SIP device - don't expect it to work with softphones or anything like that.