Configuring 48x for Dedicated SIP Trunk & Mobile App
Posted: Mon Nov 23, 2020 2:26 pm
Everyone,
I have a 48x with PRI service connected to my LAN in LAN HOST MODE and nothing connected to the WAN port. Everything is working fine, including the Mobile App.
My PRI provider has jumped the cost sky high so it's time to dump PRI and go with a SIP trunk. Specrum can provide a SIP Trunk with a box that provides an ethernet port connection.
I am assuming I can use the WAN port to connect the Specrum SIP device for SIP service. Need help with ...
- I am looking for a guide to configure the 48x for SIP trunk directly to the system. Everything I find assumes the SIP service is coming through the Internet to the LAN port of the 48x. I don't see any settings to tell the 48x to use the WAN port for SIP service and not to use the LAN port.
- If we connect and setup the SIP trunk on the WAN Port, will that disrupt the Mobile App functionality outside the network since it needs to use SIP/5060 out the LAN port to the Intenet to the Mobile App.
Thank you very much for your guidance.
Just another user
I have a 48x with PRI service connected to my LAN in LAN HOST MODE and nothing connected to the WAN port. Everything is working fine, including the Mobile App.
My PRI provider has jumped the cost sky high so it's time to dump PRI and go with a SIP trunk. Specrum can provide a SIP Trunk with a box that provides an ethernet port connection.
I am assuming I can use the WAN port to connect the Specrum SIP device for SIP service. Need help with ...
- I am looking for a guide to configure the 48x for SIP trunk directly to the system. Everything I find assumes the SIP service is coming through the Internet to the LAN port of the 48x. I don't see any settings to tell the 48x to use the WAN port for SIP service and not to use the LAN port.
- If we connect and setup the SIP trunk on the WAN Port, will that disrupt the Mobile App functionality outside the network since it needs to use SIP/5060 out the LAN port to the Intenet to the Mobile App.
Thank you very much for your guidance.
Just another user