If anyone is interested in helping create a new site logo please email webmaster@allworxforums.com

PLEASE NOTE: Allworxforums.com is not owned, nor run by Allworx Corp. The views and opinions found on this forum are not necessarily the views of Allworx or the forum moderators. Neither Allworx nor the forum will be held liable for any information found on the forum. The Allworx logo and name is a registered trademark of Allworx Corp.

Additional FXS Ports

General installation and configuration help.
Post Reply
BigAl
Posts: 1
Joined: Thu Jul 26, 2012 1:58 pm

Additional FXS Ports

Post by BigAl »

Can anyone recommend an FXS Gateway or Adapter that they have tried or sucessfully tested to add up to 6 analog device ports to a 6X. Adding PX Expanders are recommended by tech support, but is too expensive for this application. The ports will be used for fax machines. We've had limited success with Grandstream units.
doom1701
Posts: 69
Joined: Tue Sep 20, 2011 6:52 pm

Re: Additional FXS Ports

Post by doom1701 »

We've had good luck with the Linksys SPA line...but not so much with fax machines.
psj1026
Posts: 1
Joined: Tue Dec 20, 2011 3:41 pm

Re: Additional FXS Ports

Post by psj1026 »

BigAl wrote:
> Can anyone recommend an FXS Gateway or Adapter that they have tried or
> sucessfully tested to add up to 6 analog device ports to a 6X. Adding PX
> Expanders are recommended by tech support, but is too expensive for this
> application. The ports will be used for fax machines. We've had limited
> success with Grandstream units.

Just installed a Grandstream GXW4008 FXS with no problems
Post Reply