Ports needed for Mobile Link IPhone app

[lyndsey]

What ports need to be opened on my firewall for the Mobile Link Iphone app?

[dcrain]

Not sure if you found the answer yet... 8081

[justingoldberg]

Besides 8081, the smtp and pop3 ports, 25 and 110.

[catracer]

The following network settings on the iAllworx Preference screen must match those for the Allworx
server:
• Allworx Server public address or domain name
• Mobile Link (AMDS) Port Number
• IMAP Port Number
• SMTP (Voicemail) Port Number
The default port settings on the Preference screen are the same as the default port setting on
Allworx servers. If IMAP and SMTP are set to non-standard ports (defaults are IMAP: 143 and
SMTP: 25), these ports will be blocked by the Allworx Server Firewall. To open these ports, the
System Administrator must:
1. From the Admin page, navigate to Network / Configuration
2. Select the modify link
3. Under the Firewall section, enter the port number to open in the WAN Port # and LAN Port
# fields
4. Leave the Protocol as TCP
5. Enter the server’s WAN IP Address in the IP Address field
6. Save these changes and reboot the Allworx Server

[liftow]

AllWorx needs to work on their networking/ports documentation. Get something together that lists all network ports that might be needed and what they are needed for.
IMAP and SMTP are not mentioned in the network section where it lists the other ports for getting phones to work.
I'll try opening those, as I've had trouble getting iAllWorx to work from external sources - LAN/WAN works fine.

[liftow]

Still can't get iAllworx working remotely. No problems on internal network.

Allworx 48x (7.4.12.5)
LAN Host
Public IP Address filled in
Ports 8081, 143, 25 all mapped to Allworx on Firewall. All tested open at yougetsignal.com
iAllworx setup with domain name that points to LAN IP internally, Public IP externally. I have also tried with external IP as opposed to domain name.

What am I missing?

Can't wait for Reach - just hope documentation is available for it!