If anyone is interested in helping create a new site logo please email webmaster@allworxforums.com

PLEASE NOTE: Allworxforums.com is not owned, nor run by Allworx Corp. The views and opinions found on this forum are not necessarily the views of Allworx or the forum moderators. Neither Allworx nor the forum will be held liable for any information found on the forum. The Allworx logo and name is a registered trademark of Allworx Corp.

ALGO Pager Alerter settings - working paging through multicast [set to unmanaged]

General installation and configuration help.
Post Reply
justingoldberg
Posts: 96
Joined: Tue Mar 29, 2011 10:02 pm
Location: Southeast USA
Contact:

ALGO Pager Alerter settings - working paging through multicast [set to unmanaged]

Post by justingoldberg »

Code: Select all


admin.devname = sipalerter
admin.keyui = 1
admin.lang = en
admin.pwd = algo
admin.voice = en
admin.welcome = 1
audio.mcast.mode = 3
audio.mcast.zone = 239.255.10.0:56586
audio.menu.vol = 1
audio.noise.level = 66
audio.noise.use = 0
audio.page.mode = 0
audio.page.timeout = 0
audio.page.tone = page-notif.wav
audio.page.vol = 4
audio.relay.mode = 0
audio.ring.tone = warble2-med.wav
audio.ring.vol = 4
audio.spk.mode = 0
audio.test.mode = 0
log.level = error
log.method = local
log.server = 
log.size = 100
net.dhcp.timeout = 60
net.dhcp.use = 1
net.discovery = 1
net.dns1 = 
net.dns2 = 
net.gateway = 
net.http = 1
net.ip = 
net.mask = 
net.time = 
net.vlan.id = 
net.vlan.priority = 
net.vlan.use = 0
prov.dhcp.use = 9
prov.download.method = tftp
prov.server.method = static
prov.server.static = 
prov.use = 1
sip.alert1.auth = xxxx
sip.alert1.event = 
sip.alert1.mode = 
sip.alert1.pwd = xxxx
sip.alert1.user = xxxx
sip.diffport = 0
sip.ka.method = 0
sip.ka.period = 30
sip.mwi.event = 0
sip.mwi.mode = 0
sip.obproxy = 
sip.proxy = x.x.x.x
sip.regexp = 3600
sip.registrar = 
sip.stun = 
sip.u1.auth = 
sip.u1.pwd = 
sip.u1.user = 
Post Reply