If anyone is interested in helping create a new site logo please email webmaster@allworxforums.com

PLEASE NOTE: Allworxforums.com is not owned, nor run by Allworx Corp. The views and opinions found on this forum are not necessarily the views of Allworx or the forum moderators. Neither Allworx nor the forum will be held liable for any information found on the forum. The Allworx logo and name is a registered trademark of Allworx Corp.

Lost our transfer to outside line capability?

General installation and configuration help.
Post Reply
warrenrk
Posts: 1
Joined: Fri Feb 18, 2011 5:20 pm

Lost our transfer to outside line capability?

Post by warrenrk »

Allworx 6x w/ version 7.4.10.5

We recently saw an increase in SIPvicious brute force attempts and decided to add authentication to our SIP Proxy registration.

We coordinated with our provider and added the authentication. We tested incoming & outgoing and everything seemed fine.

Next day I received complaints that the transfers to outside lines were not connecting. Either 3 beep then drop or fast-busy, 3 beep then drop.

Nothing else was changed on the Allworx side during this authentication addition. Does SIP Proxy registration have some other effect on transfered calls to outside lines?

Any assistance appreciated.
Top
shawnn
Posts: 1
Joined: Wed Mar 06, 2013 8:16 pm

Re: Lost our transfer to outside line capability?

Post by shawnn »

We encountering same issue. Have you found a solution?
Top
Post Reply

Return to “Installation and Configuration Help”