We're using a 6x as a network router but it isn't working that well in that capacity for ~20 users.
Is there a way to set a device besides the Allworx as the gateway automatically, without staticing each phone?
If anyone is interested in helping create a new site logo please email webmaster@allworxforums.com
PLEASE NOTE: Allworxforums.com is not owned, nor run by Allworx Corp. The views and opinions found on this forum are not necessarily the views of Allworx or the forum moderators. Neither Allworx nor the forum will be held liable for any information found on the forum. The Allworx logo and name is a registered trademark of Allworx Corp.
PLEASE NOTE: Allworxforums.com is not owned, nor run by Allworx Corp. The views and opinions found on this forum are not necessarily the views of Allworx or the forum moderators. Neither Allworx nor the forum will be held liable for any information found on the forum. The Allworx logo and name is a registered trademark of Allworx Corp.
How to set a device besides the Allworx as the gateway?
-
justingoldberg
- Posts: 96
- Joined: Tue Mar 29, 2011 10:02 pm
- Location: Southeast USA
- Contact:
Re: How to set a device besides the Allworx as the gateway?
Go into Network Config and set a static route for the IP traffic you want going to a different gateway.
Re: How to set a device besides the Allworx as the gateway?
Another way is to use a different DHCP server that can hand its own address out as the default gateway.
The Allworx DHCP server only hands its own IP as the default gateway.
The Allworx DHCP server only hands its own IP as the default gateway.
-
justingoldberg
- Posts: 96
- Joined: Tue Mar 29, 2011 10:02 pm
- Location: Southeast USA
- Contact:
Re: How to set a device besides the Allworx as the gateway?
In the sonicwall you can put in dhcp option 66 to tell the phones where the boot server is also. The dhcp boot option caused problems so we ended up putting in boot server manually. So phones still=dhcp, boot server=manual.